Bypass Ballast and Re-Wire to Single-End Power

This article will discuss how to bypass the ballast in your fluorescent light fixtures and re-wire them for single-end power. The process is simple, but should only be done by a certified electrician or licensed contractor.

Many people attempt to bypass ballast when they’re trying to re-wire their single ended lighting fixtures. But is this really the best option? It’s actually not that hard to find out, as long as you know where and how to look for it.

We’ll start by going over what a ballast does and why it’s important in your fixture. A ballast basically provides the voltage needed for an electrical current in order for your light bulb or other type of plug-in device, like a lamp, to work properly.

This means it supplies power from the wall outlet to the socket on your wall – so without one of these things happening, you won’t have any lights.

The ballast is redundant with the rest of the circuit, so it can be bypassed. The wires should then all be re-routed to connect between the positive and negative terminals on each component.

Bypass Ballast and Re-Wire to Single-End Power
Bypass Ballast and Re-Wire to Single-End Power

How do you direct wire single-ended LED tubes?

How Do You Direct Wire Single-ended LED Tubes
How Do You Direct Wire Single-ended LED Tubes

In this blog post, we will go over how you can direct wire a single-ended LED tube. First, you need to know that the LEDs on one side of the tube are connected in series with each other and all of them are connected in parallel to one side of the power supply.

Next, find an appropriate location for mounting your power supply on the back of your panel or surface mount box. Now you should solder a piece of solid core wire to both ends (positive and negative) from your power supply and then connect it to one end (negative) from your LED tube.

After connecting these wires together make sure they are secure by using some tape or glue wrap around them so they don’t come apart while installing or operating your lights.

You can use a single-ended tube by connecting it to the 12V supply and then connect that to your Arduino.

  1. Determine the length of your tube
  2. Measure the distance from one end of the tube to its other end
  3.  Calculate how much wire you need by multiplying this measurement by two (for each wire)
  4.  Cut a piece of wire for each side, then strip off about an inch or so of insulation on both ends
  5. Twist together the bare copper wires at one end and solder them together if possible
  6. Connect these twisted wires to their corresponding terminals on your LED driver circuit board.

Can you bypass a ballast?

Can you bypass a ballast?
Can you bypass a ballast?

The ballast is the main component of a fluorescent light that helps regulate the power to the tube. A ballast can be bypassed by installing an electronic HID (High Intensity Discharge) lamp or replacing it with an LED light.

There are a lot of debates about whether or not you can bypass a ballast, and the answer is yes. This blog post will provide you with different ways that one can bypass their ballast.

What is dual end ballast bypass?

Dual end ballast bypass is an ingenious invention that removes the need for a center ballast, making it easier to install and use.

This type of system works by connecting two hoses to each other on both ends of the tank, with one hose running from the tank outlet at one end down to where you want your water level set.

The other hose runs up from your desired water level back up to the inlet at the opposite end of your pool or spa. With dual-end bypass systems there’s no need for a center ballast because they are self-regulating.

Double-Ended LED Lamp

In the past few years, LED lights have become more popular in a variety of ways. They are energy efficient and environmentally friendly, which is great for people with concerns about the environment and also those who are looking to save on their electric bill.

Are T8 and T12 sockets the same?

Is the difference between T8 and T12 sockets just a matter of size?
No, that’s not it. But first things first: what is a T8 socket? It’s an Edison screw-based socket for use with compact fluorescent lamps.

What about a T12? That could be any type of lamp – including those mercury vapor ones! So let me make this clear: if you need to know which one to buy, you should look at the wattage rating on your fixture or light bulb package and choose accordingly.

Can you bypass ballast for LED lights?

It’s always a good idea to invest in LED lights. Not only are they more environmentally friendly, but they also last longer and use less electricity.

In this blog post you’ll find out whether or not you can bypass ballast for LED lights.”Have you been looking for ways to save money on your electricity bill? One way is by replacing your old fixtures with new LED lights.

These are the newest in energy-efficient lighting technology and they can last up to 50,000 hours! But before you go out and buy a bunch of expensive LEDs, take a look at this question: Can you bypass ballasts for LED lights?”.

What are the yellow wires on a ballast?

The yellow wires on a ballast are the power supply. Ballasts use electricity to create light from gas or vaporized metal. The two most common types of ballasts are magnetic and electronic, which have different wiring configurations.

Have you ever wondered what those yellow wires on a ballast are for? Well, we’re here to tell you.

Do I need to remove ballast for LED lights?

People often wonder if they need to remove their ballast when switching from fluorescent tubes or other light sources to LEDs. The answer is no! Ballasts are not needed for LED lights because they don’t use a filament like traditional bulbs.

Do you know what ballast is? Ballasts are a part of the electrical system on your boat that provides power to lights. But, not all types of lights need ballasts.

If you’re looking to upgrade your boat lighting with LED bulbs, there’s no need to worry about removing your old ballast because they don’t use one.


The benefits of bypass ballasts and re-wiring to single end power are numerous. Not only does it reduce the energy consumption, but also reduces your electric bill while dramatically increasing safety for both you and your family. If this sounds like something you want help with, fill out our contact form or give us a call today.

About Thomas Beaver

Thomas Beaver is a professional Blogger, Content Writer and SEO Wizard. He's been blogging for over 12 years and has written over 600 articles on his personal blog alone. Thomas is also an avid reader of books about the history of writing as well as non-fiction works on leadership, productivity, marketing and entrepreneurship.

Thoughts on "Bypass Ballast and Re-Wire to Single-End Power"

Let's try FREE Giveaways. Or go to Free Gifts page

Update AdBlock to see the secrets. Hit a button below for update